woodworking taper jig
Many fine furniture projects call for tapered legs. while there are many methods that could be applied to create this classic design, the easiest way may be using a tapering jig for your table saw.a tapering jig allows you to adjust your tapered cuts to nearly any angle up to 15 degrees and gives you the ability to do so consistently.. Hold the jig against the rip fence, and adjust the fence so the edge of the jig is flush with the inside edges of the blade teeth. lock the fence and pull the jig back so it's clear of the blade. step 7: start the saw, and feed the jig along the fence to rip the taper. keep your hands behind the jig support throughout the cut.. Something that a store-bought tapering jig cannot do. it is a very easy project to make. and one that you can probably build in about an hour. this could save you $75 -$100 or more on a store.
woodworking taper jig
Synopsis: tapered legs add elegance and lightness to the appearance of a piece, and there’s an easy, efficient, and safe way to cut the tapers using a dedicated jig. tom mclaughlin’s tapering jig consists of a platform, some stops, and a couple of toggle clamps. used on the tablesaw, it helps you to easily cut consistent tapers on multiple. Make tapering a little easier with the woodriver taper jig! accurately cuts tapers up to 3" per foot or 15 degrees. includes a graduated scale measuring degrees and inches per foot of taper. aluminum guide bars with 2-5/8" push handle. features: • aluminum guide bars • 2-5/8" push handle • accurately cuts tapers up to 3" per foot or 15.
Comments
Post a Comment