finishing oak shellac
Shellac can result in a high-gloss finish. a mirror-like glossy shellac finish is achieved by french polishing. if you prefer a less glossy, satin finish, buff out the final coat with 0000 steel wool and a non-silicon based paste wax. lightly work the wax over the finish until it's thoroughly covered. allow the wax to dry, wipe it off, and buff. Newer formulas for finishing oak suggest that wood dyes be applied and then over top of that, a “sealing” coat of de-waxed shellac (note, it must be de-waxed), and then on top of this a “glaze” is coated on the wood.. Shellac is widely used for sealing oak. one increasingly popular method for finishing oak is to apply an oil stain followed by a coat of shellac to seal the stain. then fill any blemishes with a grain filler paste, followed by a gel stain. the final finish is a few coats of polyurethane..
finishing oak shellac
The ravages of time and use of a piece of furniture can be limited by a durable top or finish coat. while the terms varnish, polyurethane, lacquer and shellac are commonly used to reference a final finish in general, these products are not the same, nor are they recommended to be used interchangeably.. How to french polish - woodworking finish with shellac - duration: 37:15. fabian's tiny workshop 773,614 views. 37:15. turn a $12 box in 10 minutes - the edc box - duration: 1:06:09..
Comments
Post a Comment